How to Paint Perforated Vinyl
How to Paint Perforated Vinyl
Professional painters know that coarse surfaces hold paint better than smooth ones. When amateurs try to paint slick vinyl, peeling generally results. Perforated vinyl tends to hold paint better; however, to ensure a durable finish, you should prepare it just as you would ordinary vinyl surfaces. To promote better primer adhesion, roughen the perforated vinyl, using a relatively fine-grit sandpaper. Once the perforated vinyl feels slightly coarse, the primer base will adhere.
Instructions
1 Roughen the perforated vinyl by scouring the entire surface, using a palm sander. Don't use a coarse low-grit sandpaper, or noticeable scratches may appear on the vinyl. Lightly abrade the perforated vinyl, using a relatively fine 220-grit sandpaper.
2 Place painter's tape on surfaces next to the perforated vinyl. Spread drop cloths below the area you plan to paint.
3 Coat the perforated vinyl with acrylic primer, using a roller. Watch closely for flaws within the wet base and smooth these areas by lightly rolling over them.
4 Immediately touch up the perforated vinyl before the bonding primer begins to dry. Use a polyester paintbrush that promotes smooth finishes; avoid synthetic nylon paintbrushes which are better suited for coarse surfaces. Let the perforated vinyl dry for two hours.
5 Wash each application tool in the bathtub.
6 Paint the perforated vinyl as you primed it. Apply a flat or satin enamel if you desire a muted sheen; use a semi-gloss or gloss enamel if you want a glossy painted finish.
