The installation of anti-wind and dust mesh
The installation of anti-wind and dust mesh
Anti-wind and dust mesh is widely used to reduce sand accumulation in more serious sandy areas. And it is also used in environmental protection, windproof mesh, open storage of various coal yard ,ore ,lime and other bulk flow of materials piling up in the face of strong winds above the third grade often dust the sky, to cause serious pollution of the surrounding atmosphere. Today we will say something about the installation of anti-wind and dust mesh.
1. The first step is about the dust-proof mesh underground foundation: the precast concrete blocks or on-site pouring underground foundation.
2. The second step is about the anti-wind and dust mesh supporting structure: according to the wind speed, engineering design parameters is designed. Steel stents support, mainly to "wind dust-controlling wall" to provide enough strength, with stand strong wind damage, second to consider the overall aesthetics.
3. The third step is about the wind deflector installation: it has 15 ~ 20 years service life. And it is connected with screw and plate fixation. The dimensions of a wind dust-controlling pull, opening rate should be designed according to the actual situation of depot.
4. The fourth step is about the block brick: in order to prevent slurry spillover, after snow and rain, wind wall bottom of 1.2-1.5 meters can be set up to block brick.
Above all, there are the installation steps of anti-wind and dust mesh, hope can help you.
- Prev : The merits of welded wire mesh
- Next:No Article
