How to Stack Wire Letter Trays
Instructions
Non-stackable Wire Trays
1
Buy a stacker set. They are a set of four and look like Easter egg dippers. These can be be found online or at some office supply stores.
2
Take the open ended side of the wire (the part that looks like a large 'C') and hook it onto the outside corner of the bottom wire stacking tray. It should be woven through the wire at the bottom to make sure it holds. Repeat with the other three wires.
3
Place the other end of the wire (the part that is small and almost enclosed) so it hooks into and goes through the outside of each corner of the tray that's above the bottom tray. The only side of the stacker set touching the top tray is the small, almost enclosed side. The only side touching the bottom tray is the "C" shaped other end of the stacker set.
Stackable Wire Trays
4
Purchase as many stackable wire trays as wanted. You can find them online and at office supply stores. Be sure they're the stackable trays. Most will be just the size of a letter sheet of paper and have corners.
5
Stack as many trays as necessary. Each type of tray will have a different interlocking system for this. Don't stack the trays too high as they might tip over.
6
Fill your trays. Place heavier items on the bottom trays.
- Prev : Pleat Filter Element reduce ESD and associated dangers
- Next : Carbondale manufacturer helping build One World Trade Center
