Knowledge Relate to Steel Mesh
With low carbon steel wire mesh, carbon steel wire, stainless steel wire and other materials woven or welded into a mesh material in general. Production process: ordinary woven, braided and spot embossing pattern. Mainly steel as raw material, processed through professional equipment into a mesh, it is called steel wire mesh.
Steel mesh norms and standards
National standards for the use of steel mesh specifications have certain requirements, match the diameter of the mesh size used, rather than simply the diameter size used for the plaster layer is not greater than the grid 20 × 20, a diameter of not less than 1mm, light select the diameter is not much sense to select 40 × 40 × 0.9mm and select the 10 × 10 × 0.6mm steel wire mesh, the 10 × 10 × 0.6mm is better. The steel wire in the wall plastering role is mainly from a security perspective as a fall prevention measures , for a relatively small role in resistance to cracking , because the location of the problem ; while for exterior insulation system is used in tile finishes , as the role of the first fall prevention should also be followed by resistance to cracking , so should choose the grid 10 × 10 × 0.6mm , these are some of the experiences selected grid conversion from state regulations steel mesh specifications the level of the amount of steel used conversion .
Steel mesh with mesh size indicators, silk warp, the amount of steel per square meter, galvanized, mainly considering the corrosion resistance of steel mesh and system security.
Steel mesh galvanized more critical than wire diameter, galvanized quantity is very important, must be hot dip galvanized, galvanized after welding first is better than galvanized before welding. As for the wire diameter, comprehensive consideration of site construction and meet the needs of security, 0.6 mm ~ 0.7 mm is better.
Steel mesh Uses
Wire mesh is widely used in exhibitions, rack, industry, agriculture, construction, traffic barrier, mining, stadium fences, lawn, cultivation and other industries fence, decoration, mechanical protection. Common mesh used in construction industry as shule plate mesh and mesh partition, is an essential part of top new building materials. Exterior wall thermal insulation mesh is mainly used for general building facades, cast-in-situ concrete, etc., in the structure of heat preservation system plays an important role, when construction will be hot dip galvanized steel wire rack of polystyrene in the inner side of the will be casting exterior module, external insulation board and wall a survival, after ripping insulation board and wall body 2 for one, thus saves manpower, time and cost of installation. Chooses the hot galvanizing steel wire rack polyphenyl plate, qualitative light, easy construction, facing outside can be used for brick, simple operation, also can undertake the construction in winter.
- Prev : How to Attach Wire Mesh
- Next:No Article
